HOME
Blue Planet Electron Corp. Trademark image
Blue Planet Electron Corporation

LEDpower+ AA Battery Eliminator Kits

LEDpower+ AA Battery Eliminator Kit - 1 Device
Note: There is a small variation in price depending upon the total number of batteries in the device as this affects the number of dummy batteries in the kit and the size of the power supply. Choose the number of batteries in the pull down menus.

LEDpower+ AA Battery Eliminator Kit for one (1) LED device. This kit is designed for use in any AA battery device with between 2 and 4 batteries. In checkout you can choose the number of batteries in the device. You can easily expand it by purchasing additional power injectors, dummy batteries and cables. You can also purchase the 2 LED and 4 LED kits. For example, the 4.5 or 4.8vdc power supply puts out 1000mAh. LED lanterns and candles use anywhere from 20ma to 100ma, though typically at the lower end. The power supply will officially light 6 devices but may light 12 or more.

The cables/connectors are 5.5mm x 2.1mm barrel plugs which is the same as those used for CCTV camera power supplies. Depending upon your placement of devices, it might make more sense to plug in power supplies near them rather than running all the cables from one power supply. Accessories and parts are also available separately. Every kit includes 6" metal file to file small opening to accomondate wire, though battery covers will fit over wire.

2 AA Battery Kit The AA Kit for 1 Device includes the following: A kit with 1 dummy battery will have a Plug-in 3 vdc power supply. A kit with 2 dummy batteries will have a 4.5-4.8vdc power supply. A kit with 3 dummy batteries will have a 6 vdc power supply.

In addition to the power supply the kit includes 1 power injecter with 12" cable, 2 to 4 dummy batteries, a 6" file, 6" of double sided adhesive foam tape and a complete instruction guide. The kit also includes black cable ties and twist ties to help secure the cables out of sight. The product includes a 90 day manufacturer's warranty. The product should work for many years and has been tested for many hundreds of hours. Appearance of power injectors and dummy batteries may vary.

A Note from Dan F. Schramm, CEO- Thanks for visiting. I came up with this idea because I have a number of LED lanterns and candles in my medieval styled bedroom. Replacing AAA batteries gets to be rather expensive. Frankly, I like to have things setup in advance to impress when I go out in case I bring a date home. I like my place to have a certain atmosphere. I have real candles too but it is certainly not safe to have them burning unattended. Leaving the battery powered lanterns and candles running for hours is a sure way to run through lots of batteries. Usually when I come home some of the batteries have died and that rather ruins the effect. When I leave them off for a period of time, some of the batteries go dead anyway. Our LEDpower+ product is the most reliable and economic way to make use of these devices without worrying about constant battery replacement. It also saves a lot of time without having to go purchase and replace batteries regularly.

In the support pages you will see that the wire is thin enough that you can close the battery compartment door over it. However, it is better to file a small notch into the edge where the wire comes out, which is why we include a small file. The printed instruction guide and support pages give detailed instructions. In addition, we include double-sided black foam tape to attach the wire to a corner of the lantern (if you have the lantern hanging) or otherwise secure the wire so it is not obvious and the installation is kept neat. We include 6 inches of tape. Simply use a pair of scissors to cut the desired lengths. Exact appearance of power injector and dummy batteries may vary. Exact style of file will vary.

WARNING: We do not recommend using actual batteries in addition to the power injector or in place of the dummy batteries. Doing so voids the warranty and Blue Planet is not responsible for any hazards that may result. Dead batteries will not usually pass the current anyway rendering the system non-functional.

Kit Price: $26.95 to $30.95, including free shipping.
PAY with PayPal.

Battery Number in Device

LEDpower+ AA Battery Eliminator Kit - 2 Devices
LEDpower+ AA 2 Device Kit includes 2 power injectors, 2 to 4 dummy batteries, a 2-way power splitter, one extension cable 3 meter (10 ft.), 12" of double-sided adhesive foam tape, a 6" file, black cable ties, black twist ties and the instruction guide.

The AA 2 Device Kit is for two LED devices. This kit is designed for use in a 2-4 AAA battery device. You can easily expand it by purchasing additional power injectors, dummy batteries and cables. You can also purchase the 1 LED and 4 LED kits and expand those as you like. The 4.5vdc or 4.8vdc power supply puts out 1000mAh. LED lanterns and candles use anywhere from 20ma to 100ma, though typically at the lower end. The power supply will officially light 6 devices but may light 12 or more. A kit with 1 dummy battery will have a 3 vdc power supply. A kit with 2 dummy batteries will have a 4.5-4.8vdc power supply. A kit with 3 dummy batteries will have a 6 vdc power supply.

The cables/connectors are 5.5mm x 2.1mm barrel plugs which is the same as those used for CCTV camera power supplies. Depending upon your placement of devices, it might make more sense to plug in power supplies near them rather than running all the cables from one power supply. Accessories and parts are also available separately. Includes 6" metal file to file small opening to accomondate wire, though battery covers will fit over wire. Appearance of power injectors and dummy batteries may vary.

Battery Number in Device

LEDpower+ 4 LED Device Kit - AA Battery

LEDpower+ AA Battery Eliminator Kit for 4 Devices includes 4 power injectors, 4-12 dummy batteries, a 4-way power splitter and three extension cables, each 3 meters (10 ft.) . It includes 24" of double-sided adhesive foam tape, a 6" file, black cable ties, black twist ties and the instruction guide.

AA Battery Eliminator Kit for 4 LED devices. This kit is designed for use in a 2-4 AA battery device. You can easily expand it by purchasing additional power injectors, dummy batteries and cables. You can also purchase the 1 LED and 2 LED kits and easily expand those. The power supplies for this kit range from 3 to 6 vdc. The 4.8vdc power supply (for 3 batteries) puts out 1000mAh. LED lanterns and candles use anywhere from 20ma to 100ma, though typically at the lower end. The power supply will officially light 6 devices but may light 12 or more.

The cables/connectors are 5.5mm x 2.1mm barrel plugs which is the same as those used for CCTV camera power supplies. Depending upon your placement of devices, it might make more sense to plug in power supplies near them rather than running all the cables from one power supply. Accessories and parts are also available separately. Includes 6" metal file to file small opening to accomondate wire, though battery covers will fit over wire. Appearance of power injectors and dummy batteries may vary.

Power LED Candles with LEDpower+ Kit Price: $64.95 to $ 79.85 including shipping. All kits and parts include a 90 day manufacturer's warranty and a 14 day refund return policy.

PAY with PayPal

LEDpower+ AA Battery Eliminator Kit - 4 Devices

Battery Number in Device

Thank you.

Contact Information:
Dan F. Schramm, CEO
Blue Planet Offices, Inc.
Blue Planet Electron Corporation
1107 Key Plaza, #306
Key West, FL 33040-4077

Email: dan@blueplanetoffices.com

Office: 305-897-2593 or U.S. Toll Free 1-800-518-1206

Blue Planet Security Corporation TOLL FREE: 1-800-511-9147

Blue Planet DNA Corporation 305-897-9800

Urgent Matters- Dan Schramm, CEO direct: 305-394-3439

DMCA Representation by DMCA1.com

 Home  Policy & Privacy  News Letter Signup  Comments  Blue Planet Offices Home Page   More Options